Handbook

ClearFill Star CDMA
1100187 Rev. 1.0
Page 147 of 152
11 Conformance Statements
11.1 United States
11.1.1 Introduction
The following statements are the product conformance statements that apply to the Clear Fill
Star product when deployed in the United States.
11.1.2 Federal Communications Commission (FCC)
Important! Changes or modifications made to this equipment not expressly approved by RFS
may void the FCC authorization to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- (1) this device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause
undesired operation.
11.1.3 FCC Part 15 Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct
the interference at the user’s expense.
11.1.4 RF approval
This equipment complies with Part 2, Subpart J - Equipment Authorization Procedures, of the
FCC Rules.
The Clear Fill Star system complies with Part 22 – Public Mobile Services, Subpart H –
Cellular Radiotelephone Services and with Part 24 - Personal Communications Services,
Subpart E - Broadband PCS.
11.1.5 IEC product safety conformance
The Clear Fill Star system is Safety Certified IEC 60950-1 (ed.2) by CB-Scheme.
Should the local Authority Having Jurisdiction (AHJ) require prior or additional verification of
this Certification, a Product Certificate of Compliance can be obtained from the specific
Certification Body by the Business/Product Unit Applicant for the product or by contacting
RFS customer services.
Any modifications to this equipment are not permitted without review and official written
authorization from the specific Certification Body. Unauthorized changes may violate the
Product Safety Certification. Modifications or changes authorized by official CN/CNN are
assumed to have received prior approval from this Lab.