Handbook
Table Of Contents
- 1 Introduction
- 2 ClearFill®Star System Description
- 3 System Design Guidelines
- 3.1 CDMA Basics (in preparation)
- 3.2 Required information for system design
- 3.3 Design step by step
- 3.4 Estimated RF Coverage per RRH
- 3.5 Right-sizing - the beacon feature (in preparation)
- 3.6 Capacity demand - number for BSIs (in preparation)
- 3.7 System Architecture
- 4 System Installation
- 4.1 General
- 4.2 System Installation (Hardware Installation)
- 4.3 Installation Radio Remote Head (RRH)
- 4.4 Installation Gigabit Ethernet Switch (GES)
- 4.5 Installation Base Station Interface (BSI)
- 4.6 Installation NMS Server (Hardware)
- 4.7 Commissioning of NMS
- 5 NMS Overview
- 5.1 Introduction
- 5.2 Starting the NMS
- 5.3 Tools and Utilities of NMS server
- 5.4 Main Window of NMS Application Client (structure)
- 5.5 The NMS client functionality
- 5.6 Right Click Menus
- 5.7 RRH Configuration
- 5.8 BSI Configuration
- 6 Configuration Management
- 7 System Supervision
- 8 Remote Management and Supervision
- 9 Operational used cases/Maintenance
- 10 System Specifications and Technical Data
- 11 Conformance Statements
- 11.1 United States
- 11.1.1 Introduction
- 11.1.2 Federal Communications Commission (FCC)
- 11.1.3 FCC Part 15 Class A
- 11.1.4 RF approval
- 11.1.5 IEC product safety conformance
- 11.1.6 Indoor applications
- 11.1.7 Antenna exposure
- 11.1.8 Radiofrequency radiation exposure Information
- 11.1.9 Packaging collection and recovery requirements
- 11.1.10 Recycling / take-back / disposal of products and batteries
- 11.2 Canada
- 11.1 United States
- 12 Appendix
ClearFill Star CDMA
1100187 Rev. 1.0
Page 139 of 152
10 System Specifications and Technical Data
10.1 RF Specification of ClearFill®Star System
10.1.1 General Specification
Frequency range PCS 1900 UL: 1850 – 1910 MHz
DL: 1930 – 1990 MHz
CELL 800 UL: 824 – 849 MHz
DL: 869 – 894 MHz
The channel frequencies are on a 30 kHz
spacing for Cellular band and a 50 kHz spacing
for PCS band
Supported IF bandwidth 1.25 MHz (UL and DL)
Frequency plan /
Channel allocation
C.S0002
RF impedance 50 Ohm
10.1.2 Downlink
The following specifications for DL refer to the system configuration shown in Figure 89. All
specifications apply for CELL and PCS frequency bands.
10.1.2.1 ClearFill®Star System DL Interfaces
RRH
Switch
BSIIn Out
Figure 89 DL System Configuration for Specification