Handbook
Table Of Contents
- 1 Introduction
- 2 ClearFill®Star System Description
- 3 System Design Guidelines
- 3.1 CDMA Basics (in preparation)
- 3.2 Required information for system design
- 3.3 Design step by step
- 3.4 Estimated RF Coverage per RRH
- 3.5 Right-sizing - the beacon feature (in preparation)
- 3.6 Capacity demand - number for BSIs (in preparation)
- 3.7 System Architecture
- 4 System Installation
- 4.1 General
- 4.2 System Installation (Hardware Installation)
- 4.3 Installation Radio Remote Head (RRH)
- 4.4 Installation Gigabit Ethernet Switch (GES)
- 4.5 Installation Base Station Interface (BSI)
- 4.6 Installation NMS Server (Hardware)
- 4.7 Commissioning of NMS
- 5 NMS Overview
- 5.1 Introduction
- 5.2 Starting the NMS
- 5.3 Tools and Utilities of NMS server
- 5.4 Main Window of NMS Application Client (structure)
- 5.5 The NMS client functionality
- 5.6 Right Click Menus
- 5.7 RRH Configuration
- 5.8 BSI Configuration
- 6 Configuration Management
- 7 System Supervision
- 8 Remote Management and Supervision
- 9 Operational used cases/Maintenance
- 10 System Specifications and Technical Data
- 11 Conformance Statements
- 11.1 United States
- 11.1.1 Introduction
- 11.1.2 Federal Communications Commission (FCC)
- 11.1.3 FCC Part 15 Class A
- 11.1.4 RF approval
- 11.1.5 IEC product safety conformance
- 11.1.6 Indoor applications
- 11.1.7 Antenna exposure
- 11.1.8 Radiofrequency radiation exposure Information
- 11.1.9 Packaging collection and recovery requirements
- 11.1.10 Recycling / take-back / disposal of products and batteries
- 11.2 Canada
- 11.1 United States
- 12 Appendix
ClearFill Star CDMA
1100187 Rev. 1.0
Page 122 of 152
6.2.3 GES
The GES is configurable over an own HTTP menu. This menu can be reached by simply
opening a browser (e.g. Microsoft Internet Explorer) and entering an “http://” followed by the
IP address of the GES.
It is also accessible by using the ClearFill®Star Application Client. And change to the menu
Application->Network Maps->Switches. Right click on the switch symbol and select (HTTP
device). The browser will open automatically, showing the HTTP menu of the switch.
To set up the GES for ClearFill®Star operation please follow the initial installation guide as
described in section 4.4 Installation Gigabit Ethernet Switch (GES). The use of other settings
is not advisable.
6.2.4 BSI
The following BSI functions are controlled via NMS:
6.2.4.1 Channel allocation
The channel allocation is done only once during initial sector configuration. The sector
configuration is described in chapter 6.2.1.
To change the channel allocation the sector has to be cleared by using the template
described in section 5.5.3.1.4. Afterwards the sector configuration has to be redone with
updated channel data.
6.2.4.2 Assignment to a BTS sector (VLAN setting)
The assignment to a BTS sector is done only once during initial sector configuration. The
sector configuration is described in chapter 6.2.1.
To change the assignment to a BTS sector the sector has to be cleared by using the
template described in section 5.5.3.1.4. Afterwards the sector configuration has to be redone
with updated channel data.
6.2.4.3 Summing function activation and deactivation
The setting is done automatically, no user interaction is necessary.
6.2.4.4 Switching between CELL and PCS band
The switching between CELL and PCS band is done only once during initial sector
configuration. The sector configuration is described in chapter 6.2.1.
To change the band from CELL to PCS or vice versa the sector has to be cleared by using
the template described in section 5.5.3.1.4. Afterwards the sector configuration has to be
redone with updated band values.