User's Manual

13
Part Number: J24004
Drawing Control: JD16049
Another possible source of a large spurious signal is amplifier oscillation. The amplifiers will only oscillate if the
antenna isolation is insufficient. It is also possible that "dirty" connections could be causing excessive noise output.
This would be particularly evident while wiggling cables and connectors.
ORDERING & RETURNING FOR REPAIR
Contact Celwave Order Entry at 1-800-321-4700 for a customer service request number (CSR). Be prepared to
provide the model number, serial number of the BDA as well as a description of the symptoms of the problem.
Typical turn around time for repairs is two weeks. Warranty repairs will be given the highest priority.
Send unit, freight-paid with the Return Celwave Corvallis
Authorization Number on the outside of the package to: 4100 SW Research Way
Corvallis Oregon 97333-1066
LIMITED WARRANTY
The Seller warrants that, at the time of shipment, the products manufactured by the Seller are free from defects in
material and workmanship. The Seller's obligation under this warranty is limited to replacement or repair of such
products within one year from date of shipment. No material is accepted for replacement or repair without written
authority of the Seller. Replacement or repair is made only after an examination at the Seller's plant shows defective
material or workmanship at the time of manufacture. The Buyer must prepay all shipping charges on the returned
material. The Seller is in no event liable for consequential damages, installation costs or other costs of any nature as
a result of the use of the products manufactured by the Seller, whether used in accordance with instructions or not.
The Seller is not liable for replacement of any product damaged by lightning.
THIS WARRANTY IS IN LIEU OF ALL OTHERS, EITHER EXPRESSED OR IMPLIED. No representative is
authorized to assume for the Seller any other liability in connection with the Seller's products.