User`s manual

Digital BUS-WATCH
®
PC Software Manual
Radio Engineering Industries, Inc.
640372 - Rev D - 12/15/2010
Page 16 of 99
Info
BUS-WATCH® Information Box
Additional information from the source DVR of the selected channel is displayed at the bottom
of the viewing area when an extra Window (one more than video channels) window
configuration is selected from the View selection box. This information will also appear when
you hit the Info button.
The BUS-WATCH® Information box is used to display diagnostic data, which occurs as the
video files are being recorded. This data includes status of all the event sensors, Accelerometer
data, GPS latitude and longitude coordinates, speed, vehicle power, date and time, temperature of
the DVR, company name, vehicle ID, driver name, resolution of the video, frame rate of the
video, firmware version, MCU version, and indicators for the ignition and the hard drive heater.
DVR Information Display
Additional information from the source DVR of the selected channel is displayed at the bottom
of the viewing area when an extra Window (one more than video channels) window
configuration is selected from the View selection box.
Information displayed includes the current status of sensor inputs, panic button and the time /
date from the source DVR internal clock/calendar. Additional information may include, if
available, current vehicle speed, GPS coordinates, raw accelerometer data, and troubleshooting
data.