User manual

Digital BUS-WATCH
®
HDx00
Page 76 of 93
Radio Engineering Industries, Inc.
640430 -- Rev A -- 9/7/2012
Wireless Network
Figure 62: Wireless Network
The Wireless Network settings allow the DVR to be connected wirelessly. It also
supports Auto IP detection for easy set up.
Access Point SSID: In order for the DVR to find the wireless access point, it
needs to know the correct wireless network name for it to connect to. Enter the
Access Point SSID.
IP Mode: When set to DHCP, the DVR automatically finds an available network
set up from the wireless access point. The access point DHCP function will assign
the DVR an IP automatically. When set to Static, it allows the user to enter the
network settings manually.
IP Address: The IP address needs to be set up differently for each DVR. The IP
address contains four three digit numbers from 0 to 255. The first three numbers
needs to be the same as the local gateway IP address in order to have access to the
DVR. The last number must be set up independently on each DVR.
Net Mask: A mask address is to use with the IP address as a pair. The default
setting is 255.255.255.000. Depending on how the network is set up, the user
needs to change it to work with the network.