User manual

Digital BUS-WATCH
®
HDx00
Page 71 of 93
Radio Engineering Industries, Inc.
640430 -- Rev A -- 9/7/2012
Figure 55: Input Setup - Custom
Input #: the input numbers correspond to pin number of the DVR input.
Description: name of the signal. Use remote to enter name.
Disp: OSD abbreviation. Use remote to enter abbreviation.
Input When Activate: set to High if signal is high (positive) when
activated; set to Low if signal is low (ground or negative) when activated.
Alarm When Activate: when set to On, DVR triggers an alarm when the
particular input is activated.