User manual

Digital BUS-WATCH®

Radio Engineering Industries, Inc.

640333

Rev 0 -- 1/1/2006

DVR Features

• Search Video by Date, Hour, or External Event Triggers.

• On screen menu system for programming options.

• Hard drive heater to warm the hard drive to a safe operating temperature in

cold weather.

• Non-volatile ROM and battery backed-up memory.

• Ten 24-hr. programmable timers that are used to start and stop the recording

process without user (driver) intervention.

• Time and date are at the bottom of the picture so detail at the top of the picture

is not hidden.

• Electrically backward compatible with previous BUS-WATCH® models.

• Front panel keypad for easy programming of options and features.

• Audio and video jacks located on the front of Digital BUS-WATCH® IV for easy

access.

• Hot swappable Hard Drive Modules for easy video retrieval and less vehicle

down time.

System Components

• Industrial grade Digital Video Recorder.

• Hard Drive Module (120-160GB)

• Slide mount bracket (part of 710000 or 710000FM).

• Low light CCD cameras – Color, Black & White, or Decoy (4-16)

• Camera to Digital BUS-WATCH® IV cables – 510781 (or other length cables).

• Digital BUS-WATCH® IV cabinet power cable - 512002 (or other length cable).

• Vehicle Sensor Options Harness – 512008

• Event Record / External Record Indicator Harness – 511986 (or other length

cables).

• GPS Antenna - 710010

• Desktop Viewing Station - 710005

Initial Set Up

The Digital BUS-WATCH® IV system will operate without any user setup with the

default settings, however, it may not show the correct time and date (Factory Set

to Central Standard Time). To set the correct date and time and to program the

system operation to your requirements, please refer to the Menu section of this

manual.

When accessing the Menu, it is necessary to connect a video monitor to the Video

jack on the front of unit. REI recommends our battery-powered 5-inch Color LCD

monitor, P/N 690484.