User manual

Digital BUS-WATCH®
34
Radio Engineering Industries, Inc.
640333
Rev 0 -- 1/1/2006
Speedometer Signal Levels Screen
Considering the wide variety of speedometer pulse signal levels from the various
types of transmissions, the Digital Bus-Watch® IV System allows users to manually
set the speedometer input filter circuitry to best match the vehicle output signal.
Speedometer Signal Levels Screen Shot
Figure 28
Screen Adjustment Screen
This screen is used to adjust the position and width of the on-screen display, using the
arrows and the SEL buttons.
There is an 'X' in each corner of this screen to make it easy for the user to center the
display in the monitor. Reference Figure 29.