User manual

Digital BUS-WATCH®
25
Radio Engineering Industries, Inc.
640333
Rev 0 -- 1/1/2006
• OSD – This button brings up and removes the overlaid status On Screen
Display. The overlaid status On Screen Display is not permanently
recorded to the hard drive, as opposed to the time and date display which
is recorded to the drive.
• ZOOM – Toggles on and off the zoom mode functionality.
• FUNCTION CONTROLS
• PLAY - Plays back recorded video. Begins playback at the last recorded image.
• REC - Starts recording. Recording is indicated a green LED near this button.
• STOP - If the unit is recording, this button stops the recording. If the unit is
playing, this button acts as a PAUSE. Pressing this button while PAUSED stops
playback and puts the unit in Monitor Mode.
• FF - If the unit is playing, this button FAST FORWARD SCANS through the
recorded video. Pressing this button several times increases the scanning speed.
• REW - If the unit is playing, this button REWIND SCANS through the recorded
video. Pressing this button several times increases the scanning speed.
• STEP REV - If the unit is in play mode and paused, this button moves the video
back one image.
• STEP FWD - If the unit is in play mode and paused, this button moves the video
forward one image.
• CAMERA CONTROLS
• CH SEL - This button selects through the available individual camera views.
• QUAD – This button changes the video output display back to the 4 channel
quad display.
• VIDEO CONTROLS
• DATE HOUR – If the unit is in play mode and paused, this selects between date
search and hour search modes.
• ALARM – If the unit is in play mode and paused, this selects the alarm search
mode.
Menu System
The menu system allows the user to set and save the system operating parameters.
Connect a monitor to the Digital BUS-WATCH® IV using the front jacks labeled AUDIO
and VIDEO. To activate the menu system, press the MENU button. The first screen that
appears is the Main Menu.