User manual
Digital BUS-WATCH®
28
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
Screen Adjustment Screen
This screen is used to adjust the position and width of the on-screen display, using the
arrows and the SEL buttons.
There is an 'X' in each corner of this screen to make it easy for the user to center the
display in the monitor.
Figure 22
Center On-Screen Display
Use the arrow buttons to center the four 'X's in the screen. Pressing MENU resets
this setting to the factory defaults. When finished, press EXIT to save the settings.
Adjust Width
Use the left and right arrow buttons to change the width of the on-screen display.
Pressing MENU resets this setting to the factory defaults. When finished, press
EXIT to save the settings.