User manual

Digital BUS-WATCH®

Radio Engineering Industries, Inc.

640289

Rev B -- 11/18/2002

Figure 19

Set Timers Screen

An example of the timer screen is shown in Figure 17. There are ten timers,

labeled T0 through T9. Each timer shows the day of the week when it is active, the

start time, the stop time, and the Enable setting. The Yes means that this timer is

enabled. A No indicates that the timer is disabled.

Figure 20

Use the arrow keys and the SEL button to select the timer. The parameter being

changed, whether it is weekday, start hour, stop minute, etc., will flash. First,

select the day you wish this timer to operate. You can choose any day of the week

or the "MF" setting, which causes the timer to work on every weekday, Monday

through Friday.

All timers should be set up in advance. Any timer that is not used should be

disabled by setting it to No.