User manual

Digital BUS-WATCH®

Radio Engineering Industries, Inc.

640289

Rev B -- 11/18/2002

• Use the UP and DOWN arrow keys to adjust the displayed speed to match that

the hand-held voltmeter. This might require many keypresses.

• When the voltages match, press EXIT to save the calibration and return to the

previous menu.

Capture Image Screen

This submenu screen is used when you wish to download a still image to a PC via the

serial port.

Note: As with all MENU functions, you must have a video monitor connected to the

VIDEO OUT jack on the Digital BUS-WATCH. Live video images cannot be transferred

directly to PC through the serial cable.

Figure 14

The procedure to download an image from the Digital BUS-WATCH® is as follows.

• Connect the serial cable from the PC to the jack on the front of the Digital BUS-

WATCH®.

• On the PC, open and run the REI Viewer software. (The software must be

installed in advance.) The PC is now waiting to download an image.

• Press MENU to bring up the Main Menu.

• Select CAPTURE IMAGE.

• Select DOWNLOAD IMAGE NOW. The video switches from the MENU to the

current PLAYBACK image. Control of the PLAYBACK is now shared between the

unit's front panel and your PC.

• On the PC, right-click in the REI Viewer window. This brings up a function menu.

See Figure 15.