User manual

Digital BUS-WATCH®
18
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
Connect a monitor to the Digital BUS-WATCH® using the front jacks labeled AUDIO
and VIDEO. To activate the menu system, press the MENU button. The first screen that
appears is the Main Menu.
Main Menu Screen
The Main Menu Screen has several different options used to configure the system's
operating parameters. Use the arrow keys to move the cursor to the desired line and
press SEL to execute the desired command.
Figure 12
CALIBRATION
Allows the user to calibrate the speedometer and voltmeter functions.
CAPTURE IMAGE
Used when downloading digital images to a PC via the serial port.
SET OPTIONS
Where the user configures many of the system's operating parameters, such as
recording options, on-screen display options, off-delay, and others.
SET TIME/DATE
Used to set the system's time and date.
SET TIMERS
Used to set up the ten different recording timers.
SET ROUTE ID
Used to program this specific unit's Route ID # or description.
SYSTEM INFO
This screen displays the several parameters than can be used in troubleshooting.
SCREEN ADJUSTMENT
Allows the user to adjust the appearance and position of the on-screen display.