User manual
Digital BUS-WATCH®
17
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
Figure 11
Controls:
• MENU - Brings up the System Control menu.
• EXIT - Exits the current menu or function.
• SEL - Selects the current menu setting. Functions much like an
ENTER key. If the unit is in SLEEP mode, pressing this button causes
it to wake up and enter RECORD mode. If the SYSTEM SWITCH is
off, pressing this button again puts the unit back into SLEEP mode.
• Directional Arrows - These buttons are used to navigate the menus.
• PLAY - Plays back recorded video. Begins playback at the last recorded
image.
• REC - Starts recording. Recording is indicated a green LED near this button.
• STOP - If the unit is recording, this button stops the recording. If the unit is
playing, this button acts as a PAUSE. Pressing this button while PAUSED
stops all playback and puts the unit in Monitor Mode.
• FF - If the unit is playing, this button FAST FORWARD SCANS through the
recorded video. Pressing this button several times increases the scanning
speed.
• REW - If the unit is playing, this button REWIND SCANS through the
recorded video. Pressing this button several times increases the scanning
speed.
Menu System
The menu system allows the user to set and save the system operating parameters.