User manual

Digital BUS-WATCH®
13
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
Mount Conversion
Slide Bracket Modification (Figure 7)
1. Remove tower from slide bracket using four cap screws.
2. Slide tower to other side of bracket.
3. Reattach tower to slide bracket using four cap screws.
4. Remove connector box from tower using four screws.
5. Rotate connector box such that the rubber grommet is on the outside
edge of the tower.
6. Reattach connector box to tower using four screws.
2
11
2
Figure 7
Digital BUS-WATCH® Cabinet Modification (Figure 8)
Reverse the placement of the slide rails with screws and washers from top to
bottom of the Digital BUS-WATCH®.
Figure 8