User manual

Digital BUS-WATCH®
12
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
Digital BUS-WATCH® Hanging Mount (See Fig. 6)
1. Find a suitable location under the first seat behind the driver or under
the drivers seat.
2. An area 15-1/2 inches should be unobstructed in front of the slide
bracket to allow sliding the security cabinet onto the slide bracket.
3. If necessary modify the positions of the tower, connector box, and
slide rails according to the instructions above.
4. Position the slide bracket on the frame of the seat in the desired
location. Drill 5/16th inch holes through the frame using the bracket as
a guide.
5. Attach slide bracket to seat frame using nuts and bolts.
Figure 6