User manual

Digital BUS-WATCH®
10
Radio Engineering Industries, Inc.
640289
Rev B -- 11/18/2002
(Optional) BW Options Harness Wiring Instructions
WIRE COLOR WIRE DESCRIPTION
(2) YELLOW RIGHT & LEFT YELLOW WARNING LAMP BANK
(2) RED RIGHT & LEFT RED WARNING LAMP BANK
BLUE STOP ARM LAMP
BROWN BRAKE PEDAL LAMP
WHITE AUX SIGNAL 1
VIOLET AUX SIGNAL 2
Yellow Warning Lamps
Connect the YELLOW wires to each of the Warning Lamp Flashers’ Yellow lamp
outputs.
Red Warning Lamps
Connect the RED wires to each of the Warning Lamp Flashers’ Red lamp outputs.
Stop Arm Lamps
Connect the BLUE wire to the switched side of the top stop arm lamp.
Brake Lamp
Connect the BROWN wire to the switched side of one brake lamp.
On-Screen Information with (Optional) BW Options Harness
The Digital BUS-WATCH® Surveillance system, when equipped with the BW Option
Harness, will display information on-screen when the vehicle’s monitored switches are
activated and signals are applied to the monitored sensors.
ACTIVE SWITCH OR SIGNAL ON-SCREEN DISPLAY
BRAKE APPLIED
B
STOP ARM DEPLOYED
S
LEFT YELLOW WARNING LAMPS ON
(SEE NOTE 1)
* Y
RIGHT YELLOW WARNING LAMPS ON
(SEE NOTE 1)
Y *
LEFT RED WARNING LAMPS ON
(SEE NOTE 1)
* R
RIGHT RED WARNING LAMPS ON
(SEE NOTE 1)
R *
SPEEDOMETER
(SEE NOTE 2)
XX
MPH
NOTES:
1. The “*” symbols will alternately appear on each side of the “Y” or “R” in concert with the active lamp
bank.
2. The XXs represent the vehicle speed (i.e. 35).