User's Manual

DMR_Manager Operating Manual 2011/07/04 Version 1v2
Reserved Document – Don’t forward without authorization
Page 38 of 51
The Signallings section of the multichannel configuration form, displays the timeslot in use (first column)
and related signalling (usually PTT).
To enable these functions click on Set ; All the parameters will assume their original values if you restart the
device, unless you perform a Save in eep operation (see the DMR LAYER CONFIGURATION paragraph).
Note: The configuration of MTCH is set by the factory for the intended use. The use of this form is restricted to
skilled users and only to test the presence of the timeslots in the section Signallings .
6.2.2.8 AFC - AUTOMATIC FREQUENCY CONTROL
Clicking on RA-DMR  RadioConfiguration  AFC it is possible to continuously monitor the
synchronization of the equipment and change some related parameters.
The timing of the Base Station can be extracted from different sources: