User's Manual

DMR repeater 24/01/2011 Versione 1.1
Documento Riservato - non divulgabile senza autorizzazione
Pag. 53 / 55
The Frequencies section displays the current operating channel, the transmitting and receiving
frequencies and the subaudio settings (TCS,DPL,TCS frequency, DPL code).
6.2.3.3 CALIBRATIONS RESULTS
This form displays the calibration results (TX,RX and loop test).
Clicking Save in eep calibration levels will be saved on eeprom and used in case of unsuccessful result of a
further calibration process.
The Refresh button update the calibration results: it is useful when calibrating, to real time monitor the
calibrations results.
User are strongly advised not to use Write