Manualshelf

User's Manual

ManualsBrandsRadio Active Design ManualsElectronicsWireless Intercom System-Base Station
81828384858687888990
UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 81 of 95
1) Disconnect all devices.
2) Open the Write to Belt Packs dialog.
3) Using a single USB cable, connect to one Belt Pack at a time.
4) As soon as that Belt Pack is written, disconnect it and connect to the next Belt Pack.
5) Continue until all Belt Packs have been written.
D
EVICE FIRMWARE UPDATE
BASE STATION FIRMWARE
BELT PACK FIRMWARE
AUTOMATIC UPDATES
If a newly connected device requires a firmware update, a firmware dialog will automatically be
presented.
CURRENT AND REQUESTED VERSIONS
The Current (old) and Requested (new) versions of the device's firmware are displayed.
The Composite version number refers to the entire firmware update, and the individual versions such
as Microcontroller, Transmitter, and Receivers refer to the firmware of individual components.
UPDATE BUTTON
Click the Update button to proceed with the firmware update process.