User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 73 of 95
CTRL-V (PASTE DOWN)
Copy frequencies out of an email or other document and paste them into the frequency fields by
holding down the Ctrl key while pressing V (Ctrl-V). If several frequencies are copied, each one on a
separate line, the user can paste them all it at once.
BUTTON LABELS
Button 1, Button 2, Button 3, Button 4
Labels must be specified in the Button Labels dialog before they will appear in the drop-down lists. See
Button Labels for more information.
MIDDLE SECTION — TRANSMITTER, BUTTON ACTIONS, AND BATTERY SETTINGS
TRANSMITTER
Frequency
Belt Pack transmitters and Base Station receivers use the VHF band from 174 to 216MHz Enter a
frequency from 174.025MHz and 215.975MHz, evenly divisible by 5 kHz. Allow at least 25 kHz
bandwidth between receivers.
Right-click on a Frequency field to pop up a Frequency menu.
Power
Options include 10mW and 50mW.
Lock
While the Belt Pack is connected via USB, the lock status is continually updated.
BUTTON ACTION
Button 1, Button 2, Button 3, Button 4
Options include Disabled, PTT, and Latch.