User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 70 of 95
set up as the Master and the rest as a Slave. The slave Base Station transmitters and wired intercoms
will be disabled, but will route wireless Belt Pack audio data to the master unit. In effect, this means
that up to 36 Belt Packs can be used in a single wireless two-channel system.
Please refer to the User Manual for additional information.
MIC & HEADSET SETTINGS
Configure the microphone and headset on the base station.
Gain
Microphone gain ranges from 1 (low) to 32 (high).
Setting
Options are Separate (one channel in one ear, one in the other), and Combined (both channels in both
ears).
Mode
Options are Off, Listen and Talk, and just Listen.
PROGRAM BUTTON
Write all current settings to the Base Station connected to the USB port.
BASE STATION CONNECTED
When a Base Station is connected via USB, select one of the following actions:
Read from the Base Station.
All of the Base Station's current settings will be read into the Base Station Tab.