User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 64 of 95
The Program Belt Packs command presents the Write All Belt Packs dialog to quickly program all Belt
Packs.
The Update Firmware command presents the Base Station or Belt Pack Firmware Update dialog for the
connected device. Normally this dialog will automatically appear as soon as a device is connected that
requires an update.
THE SCENES MENU
The Scenes menu is invoked either from the menu bar or by right-clicking one of the Scenes drop-
downs.
The Add Scene command presents the Add Scene dialog for adding a Scene to one or more Belt Packs.
The Remove Scenes command presents the Remove Scenes dialog for removing one or more Scenes
from one or more Belt Packs.
The Rename Scenes command presents the Rename Scenes dialog for renaming any or all Scenes
belonging one or more Belt Packs.
THE OPTIONS MENU
The Software Preferences command presents the Software Preferences dialog.
The Channel 37 command presents the Permit Use of Channel 37 dialog.
THE HELP MENU
The Show Device Info command presents the Base Station or Belt Pack Info dialogs for all connected
devices.
The RAD UV-1G Help command shows the online help system.
The About RAD UV-1G command shows the About Radio Active Designs UV-1G dialog.
THE POPUP FREQUENCIES MENUS
Right-clicking on a Frequency field will pop up a Frequency menu to easily copy frequencies entered in
the Base Station tab to corresponding fields in the Belt Packs tab.