User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 62 of 95
PC APP
OVERVIEW
The Radio Active Designs UV-1G PC Application provides the user with ability to update and inspect the
configuration of the Base Station or Belt Pack. Additionally, it provides the ability to update the
firmware in 1G devices. The communication between the Base Station or Belt Pack and UV-1G PC
application utilizes USB. The application allows the user the ability to save and load an unlimited
number of configurations.
CONFIGURING THE BASE STATION
Base Station Tab configures a single Base Station.
CONFIGURING THE BELT PACKS
Belt Packs Tab configures up to six Belt Packs.
PASSCODES
Passcodes dialog sets and enables passcodes for the Base Station and Belt Packs.
BUTTON LABELS
Button Labels dialog specifies the pick list of button labels for the Belt Packs.
TIPS AND SHORTCUTS
Copy Down Shortcut (Ctrl-D)
To set all receivers to the same settings, change one setting then hold the Ctrl key while pressing D
(Ctrl-D). The setting will copy to all the fields below it.
Paste Down Shortcut (Ctrl-V)
To copy frequencies out of an email or other document and paste into the frequency fields, hold the
Ctrl key while pressing V (Ctrl-V). If several frequencies are copied, each on a separate line, it is
possible to paste them all at once.
Context Sensitive Help Shortcut (F1)
Press the F1 key at any time to bring up context sensitive help for the window, tab, or control being
used.
New, Open, Save, Exit Shortcuts
Holding down the Ctrl key while pressing N (Ctrl-N), O (Ctrl-O), or S (Ctrl-S) act as shortcuts to the File
menu items New, Open, or Save.
Holding down the Ctrl key while pressing X (Ctrl-X) on Windows or Q (Ctrl-Q) on Macintosh acts as
shortcuts to the File menu item to Exit or Quit the software.