User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 60 of 95
Changing the Passcode
To change passcode, access the ADVANCED SETTINGS sub-menu.
• Select CHANGE PASSCODE.
• Enter the desired new passcode (press SELECT to advance to the next digit).
• Press SAVE.
• Re-enter the desired new passcode.
• Press S
AVE once finished.
If the two passcodes that were just entered match, then the passcode will be changed to that value.
If they don’t match, then the passcode will remain unchanged.
..Enter.New.Passcode:
.*..*..*..*
SAVE..............BACK
Re-enter.New.Passcode:
.*..*..*..*
SAVE..............BACK
ERROR:.Passcodes.don’t
.......match.
BACK
Passcode.changed.
BACK
Passcode:. . Disabled
...........
BACK
Low Battery Tone
The Low Battery Tone menu option in the Advanced Settings sub-menu allows the user to enable or
disable the battery tone that is heard in the headset when there is a low battery.
Change Passcode
...........Enabled
BACK
Change Passcode
LB.Tone :
SAVE BACK
• To change the setting for LB Tone, press SELECT.
• Use either encoder to change the value.
• Press SAVE to save the change or BACK to ignore it.
MICROPHONE GAIN
To change the headset microphone gain, access the Menu from the Home Screen.
• Press the right soft key showing M
IC G.