User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 59 of 95
• There are four groups: Upper Case Letters (A-Z), Lower Case Letters (a-z), Numbers (0-9), and Symbols
(SYM).
• When finished, press SAVE to save the changes or BACK to ignore them.
Info Screen
The Info screen displays the firmware version number, serial number, and model number of the Belt
Pack. The version number is a composite firmware version for all devices.
SN : XXXXXXXXXXXX
MDL: UV-1GBPX
BACK
BP.ID...:..BP1
BACK
VER: BELTYYMMDDX
SN : XXXXXXXXXXXX
BACK
The Info screen is located under the ADVANCED SETTINGS sub-menu right below BP ID.
• To view the screen, press SELECT as shown above.
E
nabling/Disabling the Passcode
The PASSCODE screen enables or disables the ADVANCED SETTINGS sub-menu passcode.
The passcode is a four-digit decimal number (0 – 9).
Info
...........Disabled
BACK
Info
Passcode:
SAVE BACK
To enable/disable passcode, access the ADVANCED SETTINGS sub-menu.
• Select PASSCODE.
• To change the setting, press SELECT.
• Turn the encoder until the desired option appears.
• Press S
AVE.