User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 58 of 95
Master Volume
...........Combined
BACK
Master.Volume
Headset.:
SAVE BACK
The headset setting is located under the Advanced Settings sub-menu right below Master Volume as
shown above.
• To change the setting, press S
ELECT.
• Turn the encoder until the desired option appears.
• Press SAVE.
Minimum Volume
The Minimum Volume menu option in the Advanced Settings sub-menu allows the user to set a
minimum volume level for the headset audio. This range for this parameter is 0-32.
Headset.:..Combined
...........1
BACK
Headset.:..Combined
Min.Vol.:
SAVE BACK
• To change the setting for Min Vol, press SELECT.
• Use either encoder to change the parameter.
• When done, press SAVE to save the changes or BACK to ignore them.
Belt Pack ID
The Belt Pack ID menu option in the Advanced Settings sub-menu allows the user to set a unique
identifier for that Belt Pack. The ID can be a maximum of six characters.
Min.Vol..:..1
.........:..BP1
BACK
.P1234
SAVE.....[A-Z]....BACK
• To change the ID, press S
ELECT.
• The left encoder changes the currently selected character.
• The right encoder changes the group.