User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 56 of 95
o Press SAVE to save the changes or BACK to ignore them.
.IRECTOR
SAVE.....[A-Z]....BACK
CAMERA 1
REMOVE............BACK
• Press R
EMOVE to remove the currently selected label. Some labels aren’t removable. If
REMOVE is missing on the left soft key, the label isn’t removable.
Are you sure you want
to remove DIRECTOR?
NO YES
DIRECTOR removed!
....................OK
CAMERA 1
REMOVE............BACK
• To add a label to the list, select the Add New Label option. Labels are allowed to be a
maximum of eight characters, and the controls are the same as editing.
Joe’s CH added!
....................OK
Joe’s C
ADD......[A-Z]....BACK
Edit/Remove Labels
BACK
Rx Attenuation
The Rx Attenuation menu option in the Advanced Settings sub-menu allows the user to set some RF
front-end attenuation for the receivers. This parameter can be set to 0dB (default), 5dB, 10dB, 15dB,
and 20dB. This applies to both receiver channels.