User's Manual
UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 52 of 95
Select
Save / Back
Select
Save / Back
PTT
..........Disabled
Button.2:.Disabled
..................BACK
Button 1:
Button.1:
Button.2:.Disabled
SAVE..............BACK
Disabled
Button.3:.Disabled
..........Disabled
..................BACK
Button 4:
Button.3:.Disabled
Button.4:
SAVE..............BACK
Disabled
Up/Down
.
.
.
.
.
.
D
o
w
n
Down
Dow
n
D
o
w
n
Transmitter Settings
The transmitter settings allow the user to change the transmitter’s power level, frequency, and button
transmit settings.
The transmitter settings are located in the ADVANCED SETTINGS sub-menu.
Once selected, the screen will appear as follows:
T1...........50mW
....Freq...:.175.000
..................BACK
• To change the transmitter power level, press SELECT.
• Use either encoder to change the value and press SAVE to save or BACK to ignore the
change.
The choices are 10mW and 50mW.
T1..Power..:
....Freq...:.175.000
SAVE..............BACK
D
o
wn
D
own
• To change the frequency, scroll down to box F
REQ: press SELECT and the first frequency
digit will be boxed (see below).
• Use either encoder to change the boxed digit