User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 50 of 95
MANAGE SCENES
Scenes provide a way to store multiple configurations, and then easily recall them when needed. Most
user configurable settings are included in scenes except for the display settings, the passcode, the Belt
Pack ID, and the button labels list.
Manage Scenes is located at the top of the ADVANCED SETTINGS sub-menu. Manage Scenes allows
the user to change the scene, edit scene names, and add and remove scenes.
Tx Settings
BACK
The scene can be changed two different ways, in this menu or by doubling tapping the home screen
talk buttons for quick access (if it is setup that way). Here is how the scene is changed in the menu:
.......SCENEA
Edit/Remove Scene
BACK
Scene:
Edit/Remove Scene
SAVE BACK
To view the scene list, edit a scene name, or remove a scene, select Edit/Remove Scene. The screen
will appear as follows:
SCENEB
REMOVE............BACK
• Use either encoder to scroll through the list.
• Press SELECT to edit the currently selected scene name.
o The left encoder changes the currently selected character.
o The right encoder changes the group. There are four groups: Upper Case Letters (A-
Z), Lower Case Letters (a-z), Numbers (0-9), and Symbols (SYM).
o Press SELECT to change the selected character.
o Press SAVE to save the changes or BACK to ignore them.
SCENEB
REMOVE............BACK
.CENEA
SAVE.....[A-Z]....BACK