User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 47 of 95
Backlight Time
D
own
Down
Blackout.Mode.:.OFF
................20S
BACK
Blackout.Mode : OFF
Backlight.Time:
SAVE BACK
The backlight time setting changes the amount of time the backlight stays on.
Each time any button is pressed or encoder is turned the backlight timer gets reset.
Options:
5S for 5 seconds
10S for 10 seconds
20S for 20 seconds
30S for 30 seconds
60S for 60 seconds
ON meaning it will never turn off.
• To change the backlight time, press SELECT.
• Turn either encoder as shown above.
• Press SAVE to save the change or BACK to ignore it.
LCD Brightness
Down
U
p
Down
U
p
Backlight.Time: 20S
................3
BACK
Backlight.Time:.20S
LCD.Brightness:
SAVE BACK
The LCD brightness setting changes the brightness of the LCD’s backlight.
The choices are 1 – 5, with 1 being the dimmest and 5 being the brightest.
• To change the brightness, press SELECT.
• Turn either encoder as shown above.
• Press SAVE to save the change or BACK to ignore it.
NOTE: Brightness updates in real time as it is modified.