User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 39 of 95
ENABLING/DISABLING THE PASSCODE
The Menu can be passcode protected. The passcode is a four-digit 0 – 9 number.
EXIT....Link Settings: Master
........Info
........Passcode : Disabled
SAVE....Link Settings: Master
........Info
BACK....Passcode: Disabled
The passcode can be enabled or disabled from the PASSCODE screen, located below the INFO screen in
the Menu as shown above.
• To change the setting, press SELECT.
• Turn the encoder until the desired option appears.
• Press SAVE.
CHANGING THE PASSCODE
• Select CHANGE PASSCODE.
• Enter the desired new passcode (press SELECT to advance to the next digit).
• Press SAVE.
• Re-enter the desired new passcode.
• Pressing SAVE once finished.
If the two passcodes that were just entered match, then the passcode will be changed to that value. If
they do not match, then the passcode will remain unchanged.
EXIT....Info
........Passcode: Disabled
........
SAVE......Enter New Passcode:
MENU....
MENU........0....*....*....*
BACK....
SAVE.....Re-enter New Passcode:
MENU....
MENU........0....*....*....*
BACK....
BACK....
MENU....Error: Passcodes don’t
MENU.... match.
B
ACK....
EXIT....
MENU.......Passcode.Changed.
MENU....
BACK....