User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 38 of 95
LED Brightness
........LCD Brightness : 5
........LCD Contrast : 5
BACK.....................5
SAVE....LCD Brightness : 5
........LCD Contrast : 5
BACK....LED Brightness :
The LED brightness setting changes the talk buttons LED’s brightness.
• To get to the LED brightness screen, from the home s
creen, press MENU, scroll down to
Display Settings and press SELECT.
LED brightness is the last display setting. The choices are 1 – 5, with 1 being the dimmest and 5 being
the brightest.
• To change the brightness, press SELECT.
• Turn the encoder as shown above.
• Press SAVE to save the change or press BACK to ignore it.
NOTE: the brightness updates in real time as it is modified.
BASE STATION LINK MODES
• To change the Base Station link mode, go to LINK SETTINGS in the menu, and press SELECT.
• Turn the encoder to the desired setting.
• Press S
AVE.
EXIT....Local Headset
........Display Settings
........ Master
SAVE....Local Headset
........Display Settings
BACK....Link Settings: Master
INFO SCREEN
The Info screen displays a version number and serial number of the Base Station. The version number
is a composite firmware version number of all the firmware running in the Base Station.
EXIT....Display Settings
........Link Settings: Master
........VER:.BASEYYMMDDX
........SN.:.XXXXXXXXXXXX
BACK
The Info screen is located in the menu right below LINK SETTINGS.
• To view the screen, press S
ELECT as shown above.