User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 37 of 95
• To change the backlight time, press SELECT.
• Turn the encoder as shown above.
• Press SAVE to save the change or BACK to ignore it.
LCD Brightness
........Blackout Mode : OFF
........Backlight Time : ON
BACK.....................5
SAVE....Blackout Mode : OFF
........Backlight Time : ON
BACK....LCD Brightness :
The LCD brightness setting changes the brightness of the LCD’s backlight.
• From the home screen, press MENU, scroll down to Display Settings and press SELECT.
LCD Brightness is the third display setting. The choices are 1 – 5, with 1 being dim and 5 being the
brightest.
• To change the brightness, press SELECT.
• Turn the encoder as shown above.
• Press SAVE to save the change or press BACK to ignore it.
NOTE: The brightness updates in real time as it is modified.
LCD Contrast
........Backlight Time : ON
........LCD Brightness : 5
BACK.....................5
SAVE....Backlight Time : ON
........LCD Brightness : 5
BACK....LCD Contrast :
The LCD contrast setting changes the display’s contrast.
• To get to the LCD contrast screen, from the home screen, press MENU, scroll down to
DISPLAY SETTINGS and press SELECT.
LCD contrast is the fourth display setting. The choices are 1 – 11, with 1 being the dimmest and 11
being the brightest.
• To change the contrast, press SELECT.
• Turn the encoder as shown above.
• Press SAVE to save the change or press BACK to ignore it.
NOTE: The contrast updates in real time as it is modified.