User's Manual

UV-1G User Manual Rev. O 600MHz US – July 16
th
, 2019 12 of 95
UV-1G SPECIFICATIONS
RF Frequency Range Base Station 470.025 to 607.975MHz (20mW to 250mW)
614.025 to 615.975MHz & 653.025 to 662.975MHz (20mW
Limited TX Power) (Post 600MHz Auction Compliance)
Belt Pack 174.025-215.975MHz (10mW to 50mW TX Power)
Power Requirements 18 VDC, 90W - Switchcraft RASPC10P Receptacle
Temperature Range -4º F to 131º F (-20º C to 55º C)
Dimensions
Base Station 14.68” x 17” x 1.75”
Belt Pack 5.55” x 3.78” x 1.83”
Weight
Base Station 7 lbs.
Belt Pack 16 Oz
TX Antenna
Belt Pack Internal
Base Station UHF Unity Gain 1/2 wave Omni-doughnut pattern self-contained
folded dipole whip (Supplied) green stripes.
RX Antenna
Belt Pack Internal
Base Station VHF Unity Gain 1/4 wave Omni-doughnut pattern whip (Supplied)
lavender stripes.
FCC ID 2AA6F-UV-1GBP, 2AA6F-UV-1GBS
IC ID 11482A-UV1GBP, 11482A-UV1GBS
Frequency Response 100Hz-8 kHz
Two Wire Max Input Voltage +8 dBu
Four Wire Max Input Voltage +20 dBu
Auxiliary Input Adjustable (2Vrms typical)
Auxiliary Output Adjustable (2Vrms typical into 600Ω)
Stage Announce Output Internally Adjustable (2Vrms typical at rated deviation into 600Ω)
Stage Announce Relay Dry Contact, rated at 1 Amp, 24V Max
Mic Input Sensitivity 9mV
Local Headset Output 40mW output into 600Ω (1% Distortion)
TRANSMITTER
Type Two Transmitters, Synthesized
Transmit Power (each transmitter) Base: Frequency Dependent 20mW–250mW, Belt: 10mW–50mW
(Part 74 and Part 15 qualified) (Post 600MHz Auction Compliance)
Modulation Type Enhance Narrow Band
RF Frequency Stability ±1.5ppm
Occupied Bandwidth 25 kHz
Radiated Harmonics and Spurious Exceeds FCC Requirements