User Manual

SPECTRALIS 2

Start Realtime Recording during playback

Quant: – Quantize Grid Setting

Here you can select a quantize setting for your recorded notes. Directly

after finishing your recording you can check different quantize setting of

your recorded notes. The quantize function will be audible during

changing the setting.

IV. Start Recording!

As soon as you push the [Play]-button, the metronome will start to click

with the precounter and jump into recording after the precount. By looking

at the numeric buttons you will be able to tell in which bar you are

currently recording. The num-buttons are acting like bar and beat counters

during the recording. Once you’re finished recording, you may want to

change the quantize setting. As soon as you stop playing the keyboard,

the Spectralis will playback the recorded notes with the selected quantize

setting. Satisfied with the reult? Then simply push the [Stop]-button.

You will see the following display message:

Keep Recorded Events?

[Replace] [DISCARD]

[REPLACE]

Replaces an already existing motif with the new quantized recording

[DISCARD]

Discards your most recent recording and reverts to the previous version.

If you are noticing during recording, that your performance is not quite up to

snuff or you made a mistake playing, you can push the [Rec]-button while the

sequencer is still playing. This will immediately discard the bad recording in

process and will keep the sequencer in record mode.

V. Current Limitations (Version 1.5)

For now all you can record are notes, Pitchbender and Modulation wheel.

By assigning the Modulation Wheel to the cutoff frequency filter

frequency automation can be easily recorded.

3.9.7 Start Realtime recording during playback

If the pattern is already running, the realtime recording starts direct by pushing

the [record] button. Pressing play or selecting another part after your recording

opens the "Keep recorded events" dialog automaticly without stopping the

sequencer. When ending the realtime recording by selecting another part, the

realtime recording for the latest selected part starts immediatly after pressing

the [Replace] or the [Discard] button.

If you press [overdub] instead of [record], the realtime recording starts in

overdub mode. Recorded events will remain and new played notes will be

added to the recording.