User Manual

30
SPECTRALIS 2
2/5: System
USB:HIGH DSnd:Yes Sync:Dis Play:Yes
The first Parameter is of no interest for this purpose. The second parameter,
“DSound:Yes” turns the default-sound on (YES) or off (DIS).
“DIS” stands for “Disable”, which in this case means “deactivate”.
3.1.11. Deactivate the “Pattern changed, Save First”-messages
Occasionally it is quite helpful to get a reminder not to forget saving your
changes – however it can also be a nuisance, when it starts to affect the flow
and fun of jamming.
When selecting another pattern the following display message will appear when
changes are being made to the current pattern:
Sxx:<Song0 |Pattern Changed, Save first?
C:Funky | [NO] [YES]
If you chose to ignore this message without answering [NO] or [YES] via the
encoder buttons, the pattern won’t be changed.
[NO]
Confirming [NO] will enable the Pattern to change and your changes
will be lost!
[YES]
If you confirm [YES] the changes are being saved into the active Pattern.
This is the equivalent of saving a pattern with the option ”Current” in the
previous chapter.
Even if you have not selected any of the options it doesn’t mean you have lost
your pattern changes – however, you will then have to save them via the ”Save”-
function.
If you don’t the next pattern-change will definitely have the same result. If you
can’t keep an eye on the display during LIVE operation and don’t react to the
messages, the Spectralis just won’t effect pattern changes. That could become
a problem.
In order to turn off the warning messages, you will have to change the basic
settings of the "system"-menu. Use the [Shift]-button, hold it down and push
the [Save/System]-button. This should prompt the following diplay-message:
1/5:System SN:00xxxxxx V1.5
Drum:OFF Contr:100 Save:Yes Load:Ask
Saving of patterns