User Manual

129
SPECTRALIS 2
3/4:Multimode: Cutoff Envelope Page1
Att:74 ^Dcy:127 Stn:160 Rls:127
„Att“ - (Attack Time) controls the attack time of the multimode filter
cutoff frequency envelope.
„Dcy“ - (Decay Time) controls the decay time of the multimode filter
cutoff frequency envelope.
„Stn“ - (Sustain Level) controls the sustain level of the multimode filter
cutoff frequency envelope.
„Rls“ - (Release Time) controls the release time of the multimode filter
cutoff frequency envelope.
4/4:24dB Lowpass: Cutoff Envelope Page1
Att:74 ^Dcy:127 Stn:160 Rls:127
„Att“ - (Attack Time) controls the attack time of the 24dB lowpass filter
cutoff frequency envelope.
„Dcy“ - (Decay Time) controls the decay time of the 24dB lowpass filter
cutoff frequency envelope.
„Stn“ - (Sustain Level) controls the sustain level of the 24dB lowpass
filter cutoff frequency envelope.
„Rls“ - (Release Time) controls the release time of the 24dB lowpass
filter cutoff frequency envelope.
4.5 Triggergroup edit menu
Pressing the Set Routing button opens the triggergroup definition edit menu.
Triggergroups are available to split the sound engine into up to three indepen-
dent synthesizer subparts. Each triggergroup can be controlled by an indepen-
dent motif or sequencerline. If one for example builds a triggergroup assigned
to one oscillator and the lowpass filter and feeds the signal of that oscillator
exclusivly into the lowpass filter, this subpart can be controlled independent
from the rest of the engine. By default, all synthesizer elements (filters,
oscillators, noise, filterbank) are assigned to triggergroup 1.
1/3:Trigger-Group VCOs
VCO1:TG1 VCO2:TG1 VCO3:TG1 VCO4:TG1
„VCO1“ - „VCO4“ - select the triggergroup assignment for oscillators
1 - 4.
Hybrid Synthesizer reference: Triggergroups