Specifications

54 Chapter 2 Logic Control—Details
When the OPTION key is held down, pressing one of the Automation buttons chooses
the selected automation mode for all tracks. When an automation mode has been
selected for all tracks, the button’s LED will illuminate whenever the OPTION key is held.
N. B.—This is slightly different for the “Off” automation mode, when holding down the
OPTION button. While doing so, all automation “writing” buttons will be turned off, but
this does not necessarily mean that all tracks are actually in Off mode—they could also
be in different modes. To ensure that you have set all tracks to Off mode, press READ/
OFF twice (its LED goes on, then off), while holding down the OPTION key.
Group
Pressing the GROUP button enters Group Edit Mode:
• GROUP button’s LED is on
• The Assignment display shows the currently displayed group, e.g. “G1”.
• The Time display shows the group name (10 last characters if name is longer than 10
characters)
• The upper LCD line displays track names
• The lower LCD line displays group parameters
• Group parameters can be toggled with V-SELECTs
• CURSOR UP/DOWN selects previous/next group
• CURSOR LEFT/RIGHT shifts group parameter display
• SELECT buttons display if a track is a member of the group. Pressing a SELECT button
toggles track membership of the group
With Group Edit Mode off, holding down GROUP and pressing one or more SELECT
buttons allows you to create a new group.
Pressing the GROUP button, while the SHIFT button is held down, creates a new group,
opens the Group window and enters Group Edit mode.
Pressing the GROUP button, while the TRACK button is held down, switches to Track
Multi Channel View, displaying the Track Group parameter. It displays which group the
instrument is a member of. Multiple group membership is displayed like in the Track
Mixer window. Turning a V-POT changes group membership. Note that you can only
select one group (or “Off”) here.