Specifications

142 Chapter 11 CM Labs Motormix
Rotary Pots
Control Assignment
Rotary pots
1 to 8
control parameter chosen with the Rotary Selector, as displayed in the 7 segment
display (see below)
7 segment
display
shows current selection for Rotary pots:
Send editing (S-MUTE or PRE/PST LED is on):
• S1 to S8 = Send 1 to 8 level
• F1 to F8 = EQ band 1 to 8 frequency
• G1 to G8 = EQ band 1 to 8 gain
• q1 to q8 = EQ band 1 to 8 Q factor
Pan/Surround editing (select LED is on):
• Pn = Pan
• An = Surround Angle
• dv = Surround Diversity
• FE = Surround LFO
• Md = Assign Surround Mode
• X = Surround X
• Y = Surround Y
Track parameter editing (eff-4 LED is on):
• VL = Volume
• Pn or An = Pan/Surround Angle
• Md = Channel Mode
• In = Channel input
• Ou = Channel output
• Au = Automation mode
• Gr = Group membership
Assignment:
• d1 to d8 = Assign Send 1 to 8 destination
Plug-in editing (DSP/compare LED is on):
• P1 to 15 = Assign insert 1 to 15 plug-in
• P1. to 15. = plug-in parameter editing
Instrument editing (DSP/compare LED is on):
• IA = Assign instrument
• IE. = instrument parameter editing
Group property editing (group LED is on):
• G1 to 32 = group number
Rotary
Selector
selects a slot or parameter for Rotary encoders, depending on the parameters edited
with the rotary encoders:
• send slot when editing Send Level or assigning Send destination
• EQ band when editing an EQ parameter
• plug-in slot when assigning a plug-in
• Pan/Surround parameter when editing a Pan/Surround parameter
• Track parameter when editing a Track parameter
• Plug-in/instrument parameter page when editing a plug-in or instrument