Specifications

EMAGIC
LOGIC CONTROL
COMPUTER AUDIO
959
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-875-6951 • www.bhphotovideo.com
A signal present LED that
shows if an audio signal
is present
Four buttons with integrated
colored LEDs control channel
functions such as: Record, Solo,
Mute and Channel Selection
V-Pot: A digital endless rotary
knob with LED position
indicators and push button
allows parameter adjustments
of pan, EQ, send levels, etc.
The eight Channel Faders
and the Master Fader are
motorized 100mm touch-
sensitive Penny & Giles faders
with a 10-Bit (1024 step)
resolution
Large 55 x 2-digit multifunction backlit LCD display shows detailed
information on all selected parameter names and values; track names and
the contents of dialog boxes and can even be used for level metering – verti-
cally, or horizontally with peak hold and overload indicator.
Marker, Nudge, Cycle, Drop,
Click and Solo buttons extend
the functionality of the basic
transport controls
The Jog/Scrub wheel provides
precise location to any song posi-
tion as well as audio scrubbing
Five Transport buttons with
status LED for Forward, Rewind,
Stop, Play, Record
Four cursor keys (up/down/left/right) allow you to quick navigate
through plug-in slots and parameter pages. The Zoom button to
switches the Navigation buttons to zoom controls
These eight buttons allow direct
selection of specific mixer tracks
such as audio tracks, MIDI
tracks,inputs, busses etc.
Eight freely definable user keys
The Modifier buttons duplicate
the Shift, Option, Control
and Command keys of your
computer keyboard
The Automation buttons
activate the Read,Write, Touch,
Latch, Trim and Group modes
Four Utility buttons provide
direct access to saving your song,
Undo as well as cancel or
confirm in dialogs.
Six buttons, accompanied by a 2-digit, LED display
allows you to select which parameter groups the
Channel Strips are going to control – Track,
Pan/Surround, EQ, Send, Plug-In, Instrument
10-digit, LED display, switchable
between SMPTE or
bar/beats/sub division/ticks, for
song position information
The six buttons just above the master fader allow you to shift the mixer left or right
one channel at time or in 8 channel banks; Flip the assignment if the channel fader
and V-Pots and toggle the track view to access global view parameters.
Logic Control XT –
Extension Unit For Logic Control
◆ Adds eight complete physical channel strips
and an LCD to your Logic Control system
using the same high-quality key components
as the Logic Control
◆ Practically unlimited number can be added to
your system allowing greater customization
and extending the number of simultaneously
adjustable parameters.
◆ Each Logic Control/XT combination forms a
Control Surface Group (CSG).Each CSG can
control different parameters; e.g. one group
controls volume/pan and the second one
controls an audio instrument.
Comfortable, durable wrist rest
Why MIDI and not Ethernet?
Each Logic Control or XT unit requires a discrete
MIDI in and out connection.MIDI, as a protocol, was
designed for realtime performances. It has, for many
years now, proven to be accurate enough for that most
timing-sensitive of MIDI events – note information.
By comparison, the timing of controller events is far
less critical. To move a fader to a target value,an
amount of data equivalent to a single note event is all
that is required.In conjunction with the fast Penny &
Giles motorized fader units, there is more than enough
head-room in MIDI’s bandwidth to deal with the most
complex mixes.MIDI, in comparison with Ethernet,
provides simple connectivity and proven, stable
low-latency performance.