User's Manual

Connecting the WiFiHU2S to Your System

Prior to connecting the WiFiHU2S to a Window XP, the drivers should be installed. The

WiFiHU2S Modules are designed for easy connection to any wireless network. If using

Windows, load the provided drivers. The WiFiHU2S is now ready for use.

If you plan to embed the WiFiHU2S into your system, the SMD type can be mounted

onto your main board to verify or test the module functions.

If you use external antenna, connect one end of Radicom approved antenna to the on

board U.FL connector.

For ultimate performance, we recommend using two antennas to get

exceptional reception and throughput. If only using one antenna, you must use the correct

antenna socket for good performance. Connect single antenna to the socket closest to the

Radicom Research white silkscreen legend on the PCB.