User's Manual

WiFiHU2S USB Linux Driver Quick Installation Guide

Software Package & Platform requirements:

 The software package contains one WiFiHU2S Linux driver (source code) that

supports Linux Kernel version 2.6.18 thru 2.6.38 and Kernel version 3.0.2, and

WiFiHU2S documents.

 Platform requirements: Linux based platform and WiFiHU2S Linux driver.

NOTE: Kernel versions 2.6.41 and 3.2.1 will automatically detect the WiFiHU2S.

WiFiHU2S installation steps verified under following environments:

(1) Fedora 11, Kernel version: 2.6.30-105.2.23.fc11.i686.PAE

(2) Fedora 15. Kernel version: 2.6.38.6-26.rc1.fc15.i686.PAE

Operation Steps:

1. Copy the WiFiHU2S Linux driver (rtl8188C_8192C_usb_linux_v3.4.3-

4369.20120622.tar.gz) into Download directory.

2. cd Download

3. tar –zxvf rtl8188C_8192C_usb_linux_v3.4.3-4369.20120622.tar.gz

4. cd rtl8188C_8192C_usb_linux_v3.4.3-4369.20120622

5. make

6. sudo insmod 8192u.ko

7. plug WiFiHU2S into computer

8. sudo ifconfig wlan0 up

To enable WiFiHU2S. The name of WiFiHU2S is wlan0.

9. sudo iwlist wlan0 scan

Search for any wireless AP (router).

10. sudo ifconfig wlan0 192.168.1.101

Set WiFiHU2S IP address, need to find out which IP address you can use.

11. Go to top right Network Icon and choose suitable AP (or router) to connect.

12. If you want to use NetworkManager, go to top right Network Icon and choose

suitable AP (or router) to connect.

13. If you want to issue commands only, you need to disable NetworkManager and

issue network command