User's Manual

Operation examples

1. Example of connecting to 192.168.0.2 client of TCP port 3490 enter command to

RW8200 as following:

>join SSID wpa2 xxxxxxxxx

>joining:SSID

Failed to join:SSID …retrying

Successfully joined:SSID

Obtaining IP address via DHCP

Network ready IP:192.168.0.104

>tcp_server

Server ready listening on port 3490

* Make sure send data to keep TCP port alive.

2. Example of connecting to 192.168.0.2 client of TCP port 3490 as following:

>join SSID wpa2 xxxxxxxxx

>joining:SSID

Failed to join: SSID …retrying

Successfully joined:SSID

Obtaining IP address via DHCP

Network ready IP:192.168.0.104

>tcp_client 192.168.0.2

* Make sure send data to keep TCP port alive.

3. Example of how to test the start_ap command as following:

1. Prepare 2 BPM8200 and download the V1.0C4 above

firmware

2. Choose any one and setup and AP

>start_ap BPM8200 open 00000000 0

3. Use other BPM8200 join to BPM8200

a. >scan

make sure our BPM8200 is visible

b. >join BPM8200 open 00000000 <IP> <Netmask>