User's Manual

Introduction

Thanks for purchasing Radicom’s serial Embedded WiFi Module. Radicom is committed to

providing quality service and technical support in order to expedite the product development

process. The RW8200 Module requires only a serial port interface to add state of the art data

WiFi wireless operation to any system. The RW8200 Serial to WiFi Module integrates a ARM9

processor, Wireless Internet Connectivity for Embedded Devices (WICED) and an embedded

processor. Featuring a self-contained WiFi subsystem, a streamlined and simple connectivity

API and complete software development environment, the RW8200 allows OEM integrators to

incorporate WiFi wireless technology into a broad range that previously did not feature

networking capabilities. It is designed to fully support IEEE802.11b Draft 2.0, IEEE802.11g

and IEEE802.11n standards. The RW8200 is available in surface mount (SMD) or through-hole

(Dip) hardware designs. If further information is required, please contact us and we will provide

any additional help needed.

Features

• Compatible with any serial port embedded controllers

• IEEE 802.11b/g/n compatible WLAN

• IEEE 802.11i ~ WiFi security: WEP-128, WPA-PSK(TKIP), WPA2-PSK

• RTOS and TCP/IP support

• Configurable through AT commands

• Low power 3.3V operation

• Extended operating temperature (-40°C to +85°C)

• Small size 0.787” x 1.299” (20x33mm)

• ROHS compliant

• WiFi Client and AP mode

• No powerful host processor required

• 2 general IO pins

• 1 analog IO pins

• Firmware upgradable through serial port

• Supports power save mode

• Integrated CMOS power amplifier

• Cisco compatible extension certified (CCX, CCX 2.0 CCX 3.0 CCX 4.0)

• Integrated ARM Cortex-M3 processor and on chip memory for complete WLAN subsystem

functionality

• Agency approval: pending FCC15, IC, CE

Approvals

• FCC Part 15: FCC OET 65 Supplement C (SAR), 47 CFR FCC Part 15

Subpart C 15.247, 47 CFR FCC Part 15 Subpart B 2009 (Class B)

• IC RSS-102, IC ES-003 issue 4, IC RSS-210 issue 8:2010

• RoHS Compliant

•

CE Marked: EN 300328 V1.7.1: 2006, EN 62311:2008(MPE), EN 301489-1 V1.9.2:2001

EN 301489-17 V2.2.1:2009, EN 60601-1:2006/AC: 2010