User's Manual

RB9500 Designer’s Guide (01-30-16) 5
• Auto IF function.
• Auto CRC Check.
• Auto FEC by (7, 4) Hamming code (1 bit error correction / code word).
• Data Whitening for encryption and decryption.
• Separated 64 bytes RX and TX FIFO.
• Easy FIFO / Segment FIFO / FIFO Extension (up to 256 bytes).
• Support direct mode with recovery clock output to MCU.
• Support direct mode with frame sync signal to MCU.
Electronic Specifications
Item Specification Remark
Supply voltage 2.0V ~ 3.6V
Current consumption
1.5uA @Sleep mode
0.3mA @Idle mode
1.9mA @Stand-by mode
16mA @Rx mode
20mA @Tx mode (Pout = 0dBm)
Typical
Frequency 2400 – 2483 MHz ISM band
Transmit output power
-1±1 dBm @ room temperature
Typical
Rx sensitivity
-107 dBm (typical) @ 2Kbps mode, Dev = 124KHz
-104 dBm (typical) @ 25Kbps mode, Dev = 124KHz
-97 dBm (typical) @ 250Kbps mode, Dev = 186KHz
-95 dBm (typical) @ 500Kbps mode, Dev = 186KHz
BER≦1E-3
Modulation FSK or GFSK
Transmission distance 18 meters
BER≦1E-3
Interface 5 pin 2mm header, 6 pin 2mm header
Dimension
0.57”(W) x 0.99”(L) x 0.12” (H)
14.5mm(W) x 25.2mm(L) x 3.0mm(H)
Operating temperature
-40℃ ~ +85℃