User's Manual

RB8762 Designers Guide_draft v04 14
Step 3: COM Properties:
Baud rate: 115200, 8 data bits, None parity, 1 stop bits and None flow control.
Step 4: Click OK button to complete the settings.
Set-Up verification – Issue atbp-v in hyper terminal. If RB8762MB is properly setup, you
will see the device information, such as product name, manufacturer name, firmware version
and BD address.
Supported AT Command List –
AT C o mmands Slave Side Master Side Description
atbp-v Get device information
atbp-a Invalid Advertising On
atbp-otaOn Invalid OTA mode On
atbp-otaOff Invalid OTA mode Off
scan Invalid Scanning On
stopscan Invalid Scanning Off
rembd x11 x22 x33 x44 x55 x66 Invalid
To remember the BD address.
11/22/33/44/55/66 is the
device BD address you wish
to connect.
con Invalid Connect a Slave device
rssiread Invalid Read Slave device RSSI
disc Invalid Disconnect a Slave device
Note: Upper case or lower case sensitive.