Specifications

Appendix A: Embedded Web Server Configuration
1. To configure a V4410 unit via the embedded web sever, you must first determine the current IP
address of the unit. This can be accomplished using the Configuration Utility. Once the IP address is
known, open any standard web browser such as Microsoft’s Internet Explorer or Netscape’s navigator
and specify the address of the unit in the browser location bar.
2. This will bring up the main configuration page, which will allow you to start/stop streams. In the
upper middle portion of the page we can see the current IP Configuration, along with an edit button.
Pressing this Edit button will take us to a page which will allow us to modify these settings.
3. From this page we can change the IP address, subnet mask, and Gateway settings…but we have no
control over the setting DHCP. This will be addressed in a future release, along with the requirement
9