Specifications

Appendix C: Special PC Configuration
1. If all other communication fails with the unit, due to interoperable network configurations
it may be necessary for a PC to be removed from the standard network, and specially
configured to communicate with the V4410. Once the unit is configured, the PC can be set
back to how it was before.
2. Unplug the Ethernet cable from the back of your PC
3. Go to the control panel on your PC, and select the Network Connections Icon.
4. Use your right mouse button to select your specific network connections, and choose
properties.
5. A Dialog Box should appear with your PC’s current networking settings.
6. There should be an item in the middle of the box labeled Internet Protocol (TCP/IP). If
there is more than one with this name, there should be one per network interface installed
in the machine. Select the only one, or the appropriate one for your network interface
whichever applies, and then click properties.
15